Home » Centro Classic System

Centro Classic System

centro-classic-main

A- Attach base plate lower column. Grooves containing connector bars should be at 90° to base plate.
B- Stand base on the ground. Loosen and slide connector bars half way out of groove and retighten.
C- Join posts and tighten the grub screws to make assembly secure. Repeat for other base post.
D- The adjustable feet should be screwed into the horizontal 750 mm rails used at the bottom of system. Note position of tape.
E- The side and middle* straight vertical 950 mm graphic rails should now be assembled. Note position of tape strips.
F- Connect the bottom horizontal rail to the two posts and tighten grub screws before. Leave top rail until all verticals are in place. They will balance.
G- Connect side vertical rails to the bottom horizontal rail. The side vertical rails have one run of tape on them. Tape should be nearest to the post when viewed from the front.
H- Slot top horizontal rail onto all vertical rails and tightrn grub screws.

 

COMPONENT AND ACCESORIES

centro-classic-component-and-accessories

 

cento-classic-01

 

cento-classic-02

cento-classic-03

cento-classic-04

cento-classic-05

cento-classic-06

cento-classic-07

 

cento-classic-08

cento-classic-09

cento-classic-10

cento-classic-11

cento-classic-12